Module Information Monitor Data - Mitsubishi Electric MELSECQ Series User Manual

4 DATA USED FOR POSITIONING CONTROL

4.6.2 Module information monitor data

Item
Md. 10 Error
status
Md. 11 Warning
status
4 - 29
Downloaded from ManualsNet.com
Storage details
At error occurrence, the bit corresponding to the
error occurrence axis turns ON.
0: Normal (OFF)
1: Error (ON)
(The error occurrence axis cannot be run)
When " Cd. 1 Axis error reset" (axis control data)
of the corresponding axis is turned ON, the error
status of the corresponding axis is cleared (to
zero). (Refer to "Chapter 13" for details.)
b15 b12 b8 b4 b0
Storage item
Not used
Axis 1 error
Axis 2 error
Axis 3 error
Axis 4 error
Axis 5 error
Axis 6 error
Axis 7 error
Axis 8 error
(For the QD70P4, b4 to b7 are "0" fixed.)
At warning occurrence, the bit corresponding to the
warning occurrence axis turns ON.
0: Normal (OFF)
1: Warning (ON)
When " Cd. 1 Axis error reset" (axis control data)
of the corresponding axis is turned ON, the
warning status of the corresponding axis is cleared
(to zero). (Refer to "Chapter 13" for details.)
b15 b12 b8 b4 b0
Storage item
Not used
Axis 1 warning
Axis 2 warning
Axis 3 warning
Axis 4 warning
Axis 5 warning
Axis 6 warning
Axis 7 warning
Axis 8 warning
(For the QD70P4, b4 to b7 are "0" fixed.)
search engine
Default value
0000
H
Meaning
0 : OFF
1 : ON
Meaning 0000
H
0 : OFF
1 : ON
MELSEC-Q
Storage buffer memory address
(Common for axis 1 to axis 8)
1600
1601
4 - 29