Mitsubishi Electric MELSECQ Series User Manual page 35

2 SYSTEM CONFIGURATION
2 - 5
Downloaded from ManualsNet.com
(2) Support of the multiple CPU system
When using the QD70 in a multiple CPU system, refer to the following manual
first.
• QCPU User's Manual (Multiple CPU System)
Intelligent function module parameters
Write intelligent function module parameters to only the control CPU of the
QD70.
(3) Supported software packages
Relation between the system containing the QD70 and software package is
shown in the following table.
GX Developer is necessary when using the QD70.
Q00J/Q00/Q01CPU
Q02/Q02H/Q06H/
Q12H/Q25HCPU
Q02PH/Q06PHCPU
Q12PH/Q25PHCPU
Q12PRH/Q25PRHCPU
Q02U/Q03UD/
Q04UDH/Q06UDHCPU
Q13UDH/Q26UDHCPU
Q03UDE/Q04UDEH/
Q06UDEH/Q13UDEH/
Q26UDEHCPU
If installed in a MELSECNET/H remote I/O station
search engine
Single CPU system
Multiple CPU system
Single CPU system
Multiple CPU system
Single CPU system
Version 8.68W or later
Multiple CPU system
Single CPU system
Version 7.10L or later
Multiple CPU system
Redundant CPU system Version 8.45X or later
Single CPU system
Version 8.48A or later
Multiple CPU system
Single CPU system
Version 8.62Q or later
Multiple CPU system
Single CPU system
Version 8.68W or later
Multiple CPU system
MELSEC-Q
Software Version
GX Developer GX Configurator-PT
Version 7 or later
Version 8 or later
Version 1.10L or later
Version 4 or later
Version 6 or later
Version 1.13P or later
Version 1.14Q or later
Version 1.23Z or later
Version 6 or later Version 1.10L or later
2 - 5