Mitsubishi Electric MELSECQ Series User Manual page 118

6 UTILITY PACKAGE (GX Configurator-PT)
6 - 13
Downloaded from ManualsNet.com
<Initial setting of positioning data>
[Explanation of items]
(1) Setting item list
Setting item
Axis #1 Parameter Setting
Axis #1 OPR data Setting
Axis # n Parameter Setting
Axis # n OPR data Setting
Axis #1 Positioning Data Setting
Axis #n Positioning Data Setting
(2) Command button
Make text file
End setup
Cancel
POINT
Initial settings are stored in an intelligent function module parameter file.
After being written to the CPU module, the initial setting is made effective by either
(1) or (2).
(1) Cycle the RUN/STOP switch of the CPU module: STOP
RUN.
(2) With the RUN/STOP switch set to RUN, turn off and then on the power or reset
the CPU module.
If the initialization settings have been written by a sequence program, the
initialization settings will be executed during the STOP
Arrange so that the initial settings written by the sequence program are re-executed
during the STOP
search engine
Move to
sub window
Axis #1
Positioning
Setting
Select items
to be moved
to sub window.
to
to
Creates a file containing the screen data in text file format.
Saves the set data and ends the operation.
Cancels the setting and ends the operation.
RUN of the CPU module.
MELSEC-Q
n indicates the axis No.
QD70P4: 1 to 4 QD70P8: 1 to 8
RUN STOP
RUN of the CPU module.
6 - 13