Table of Contents
Advertisement
Y-shaped adapter for brake value sensor
•
Remove line at test connection 22 (1).
•
Remove line at test connection 21 (2).
•
Connect Y-shaped adapter to the two lines.
•
Connect Y-shaped adapter with compressed air line
to brake coupling head of towing vehicle.
For further information on the adapter for the test
connection, see chapter "Tools and Accessories".
You need an adjustable pressure reducing valve
(pressure regulator) for unladen or partially laden
Actros, Antos and Arocs | Towing and recovery
Compressed-air system external filling
vehicles. With this, the rear axle brakes can be actuated
according to the load condition.
•
Ensure power supply for lighting system and for ABS
from towing vehicle to trailer/semitrailer of vehicle to
be towed.
•
Switch the electronic ignition lock in the towed vehicle
to position 0.
•
After towing: Have the fault memory in the EBS/
EAPU control unit read out and erased at a qualified
workshop.
W58.20-A000-71
53
Hide quick links:
Advertisement
Table of Contents
