W27.60-A004-71
Neutral shift
•
Switch electronic ignition lock to position 0.
•
Apply parking brake.
•
If necessary: Tilt cab, see chapter "Manual-hydraulic
cab tilt system" or "Electrohydraulic cab tilt system".
•
If installed: Remove soundproofing cover.
Actros, Antos and Arocs | Towing and recovery
Mercedes PowerShift emergency operation mode
Cover (1) on gearshift shaft
Groove (2) in gearshift shaft
•
Remove cover (1) of gearshift shaft using a flat
screwdriver.
•
Turn gearshift shaft to neutral position using a
suitable, flat screwdriver and an attached box wrench
in the groove (2).
W27.60-A003-71
43