Settings Which Can Be Made Without A Code - HAKO Scrubmaster B 260 R Service Booklet

2.4 Configuration menu
2.4.4 Settings that can be carried out without a code or a diagnostic connector
Settings that can be carried out by the operator are indicated by not having to enter a code in the top field
(or connecting a diagnostic connector) and by the disk displayed next to the configuration setting for saving.
Without a code, all settings can be viewed but only released ones can be adjusted.
The code or diagnostic connector for setting parameters does not
have to be entered or connected if the operator wants to adjust
parameters (only released parameters can be adjusted).
The lock is locked.
If a locked lock is shown next to the configuration setting, the
configuration cannot be changed by the operator.
If a disk is shown next to the configuration setting, the
configuration can be changed by the operator. A green
number means: currently saved content. A green border
means: the value can be adjusted.
The content can be adjusted by turning the turn-push knob.
The number turns white and "OK?" appears as a prompt to
save this value.
After saving, the disk appears and the number turns green.
If saving should not take place, use the "return" key on the
keypad or the turn-push knob to exit the setting.
Slide 35