Table of Contents
Advertisement
9.
Drive
9.1.4
Brake – checking the brake function
The brake must be capable of stopping the machine on a level road within 0.19 m per
km/h.
At a maximum speed of 8 km/h, this means that the maximum braking distance must
not exceed 1.52 m. Check this after carrying out work at the brake system and as part
of regular maintenance.
This value must be achieved when actuating the brake tip switch S10.
The service brake function of the SCM B260R is exclusively realised via the drive
control.
The magnetic brake on the motor is merely the parking brake.
Slide 89
Advertisement
Table of Contents
