2.3 Diagnostics and communication
2.3.6 Flashing the SD-Card :
For installation of a new dash board software,
remove the Micro-SD-Card from the SD-Slot of
the dash board. Insert the micro SD-card in a
empty SD-slot of your diagnosis computer (may
a Micro-SD=>SD Adaptor is required).
Alternative a USB-Micro-SD-Adaptor can be
used.
-
Switch on the machine ( without a connected
machine the diagnostic application can´t be
started).
-
Start the Hako-Diagnostic-Software. Select
the „HAKO"-button, then press the Button „**
B260R.
-
Then select the tab „System"
This picture indicates the position
of the SD-card in the dash board.
Slide 27