Brake - Manual Release Of Brake - Front - HAKO Scrubmaster B 260 R Service Booklet

9. Drive
9.1.3 Brake – manual release of brake - front
In order to also move the machine without a power supply (no battery installed or other drive problems),
the magnetic brake can be released manually.
In order to push the machine, carry out the following steps:
1. Loosen the bolts of the cover to the drive using the supplied socket wrench and remove the cover.
2. Remove the pin Fig. 9.2-A from the holder and screw it into the ring Fig. 9.2-B.
3. In order to unlock the parking brake, slightly pull the pin upwards Fig. 9.2-C and simultaneously push
the machine.
4. Disassembly is in reverse order.
Figure 9.2 Slide 88