2.1 Settings
Respective settings can be carried out via the machine's configuration menu.
Currently, these settings are carried out via the machine display. The diagnostics plug
(order no. PN 03006790) is required for these settings. Setting via the diagnostics
system is planned but currently not yet available.
Settable parameters include:
•
Cleaning unit
•
LDS (Low Discharge Signal sender) / Battery type
•
Charger
•
Options
•
Deleting the display of the last error after repair work
•
Programmable programme variants (PPV)
•
Fixed programme variants (FPV), cleaning programmes
Sheet 10