Useful Tips; Error Code Table - HAKO Hakomatic B45 Instruction Manual

First Operation

2.5.1 Useful tips

Before beginning wet cleaning, sweep
the floor. This not only improves the
cleaning effect but also reduces the ma-
chine's liability to wear.
The floor should be treated twice in the
case of particularly dirty floors or to re-
move wax (thorough cleaning). During
the first cleaning process, the floor is
scrubbed with a cleaning agent dosage
appropriate to the degree of soiling,
whereby the squeegee is raised.
The cleaning agent is left to act on the
floor for approx. 5 to 10 minutes accor-
ding to the manufacturer's instructions,
then scrub the floor again and, after
that, treat it with the squeegee lowered.
Important information: pay attention to
the correct dosage of the cleaning
agent. The correct dosage helps to re-
duce costs and protect the environ-
ment. The development of excessive
foam impairs the machine's function. It
indicates there is too much cleaning
agent or the wrong one has been selec-
ted for the cleaning process being com-
pleted. Unused component parts of a
cleaning agent which end up in the wa-
ste water lead to the development of fo-
12
am. Information on dosage is provided
on the cleaning agent container. Use
the manufacturer's information as an in-
itial basis. Practical experience will
ensure that you quickly find out which is
the right Hako cleaning agent and the
optimum dosage to suit your needs.

2.5.2 Error code table

In addition to the Service indicator
(wrench), a four-digit service code ap-
pears in the indicator field. The dots in
the service code flash. Clear the fault or
note down the service code and inform
your authorized Hako dealer.
Error Cause
1.2.5.2. Brush motor overload
1.2.6.1. Brush is blocked
1.2.6.5. Brush semiconductor
1.2.6.6. Brush is not installed
1.4.2.1. Suction turbine semiconductor
3.2.1.1. Invalid TSG setting
4.6.1.2. Internal SE error
Remedy
Let the brush motor cool down
Remove foreign bodies
Allow the machine to cool down
or inform Hako service
Install the brush
Allow the machine to cool down
or inform Hako service
Inform Hako service
Inform Hako service