Machine Home Position - HAKO Scrubmaster B 260 R Service Booklet

2.2 Brief description

2.2.3 Machine home position

After switching on the machine, all components are set to "home position" provided
that the seat contact switch is actuated (closed).
The lifting elements will lift unless they have been switched off via the micro-switch for
the upper end position integrated in the lifting element (squeegee) or the upper end
position is detected by the control unit via the integrated potentiometer.
The spindle of a new lifting element must be turned 90° clockwise before it can be
installed in the machine.
Slide 18