6. Machine settings
6.1 Basic settings
6.1.1 Cleaning units
Four different brush units are used with the Scrubmaster B260R.
There are 3 plate brush units; 108 cm with two brush motors, 108 cm with three brush motors and
123 cm with three brush motors; and a cylindrical brush unit with a working width of 108 cm.
This setting is necessary for correct functioning of the overrange limits and water quantities.
To check and change the setting of the cleaning units, proceed as described in Chapter 2.4
Configuration. The possible setting parameters for the working units are specified in Table 6.1.
Slide 49