Operating Buttons - Novexx Solutions U-RX Operating Instructions Manual

06/15 Rev. 03
Power indicator
lamp
Start/stop
button
•
•
Unwinder/
•
rewinder
•
Inside/outside
•
winding
OPERATING INSTRUCTIONS

Operating buttons

[6] U-RX operating buttons
Lights up when the unit is ready for use, in other words when the power cord
is plugged in and the on/off switch is at "0".
The start/stop light indicates the operational status:
Start/stop light: Message
On "Stopped" mode: Unit is ready for use, but stopped.
Off "Ready" mode: Unit is ready for use.
Flashing As Rewinder: Unit is currently rewinding material and
moving the dancer arm to the start position (material
initialisation).
As Unwinder: Unit is currently unwinding material and
moving the dancer arm to the rest position (material
initialisation).
Error message: Internal error (e.g., overheating).
[2] What the red light indicates
The start/stop button does the following:
Rewinder: Starts/stops the rewinding process.
Unwinder: Starts/stops the unwinding process.
Toggle between unwinding and rewinding mode.
Light on: Unwinder
Light off: Rewinder
Toggle between inside and outside winding.
Light on: Inside winding (label on the inside).
Light off: Outside winding (label on the outside).
U-RX
Setting up, operation
Power indicator
Start/stop button/
light
Unwinder/rewinder
button/light
Inside/outside
winding button/light
8