06/15 Rev. 03
Connect the printer only to devices that fulfil SELV (safety extra-low
Only connect OEM devices.
OPERATING INSTRUCTIONS
Connections
CAUTION! Add-on devices of an inferior quality may damage the unit!
voltage) circuit requirements acc. to EN 60950.
A
[3]
Rear view of the U-RX
A Printer-stop interface: Error signal interface to the printer. If connected with
the appropriate cable, the printing stops, if an error occurs at the U-RX. This
avoids paper jam
B Power supply: Connection to the power supply using the power cable
provided
U-RX
B
Setting up, operation
5