Cleaning The Unit; Cleaning Agents; Cleaning - Novexx Solutions U-RX Operating Instructions Manual

06/15 Rev. 03

Cleaning the unit

 Turn off the unit and remove from the power supply prior to cleaning or
 On no account should liquid be allowed to enter the unit!
 Do not use any of kind of spray directly on the unit! Moisten a cloth with a
 Repairs to the unit may only be carried out by a trained service technician!
 Do not use any cleaning agents that could damage or destroy the finish, the
 Do not use any cleaning agents that are abrasive or damaging to plastics.
•
•
 Follow safety guidelines for working with flammable liquids.
 Do not smoke.
 Wet a cloth with the cleaning solvent and wipe down the part that is dirty.
OPERATING INSTRUCTIONS
WARNING!
Maintenance and cleaning may result in hazardous situations. Accidents
can occur by mechanical or electrical means if safety instructions are not
observed!
maintenance work!
cleaning agent to clean the unit!

Cleaning agents

CAUTION! - Observe the following instructions in order not to damage the
unit:
labels, the display, the nameplates, the electrical components, etc.
Avoid acid or alkaline solutions.
Housing, base plate: Commercially available neutral cleaning liquid
Rollers, rewinding mandrel: Cleaning solvent, label remover solvent (part no.
90073)

Cleaning

WARNING!
Cleaning solvent is highly flammable and can lead to fires.
U-RX
20
Setting up, operation