Connections, Device Data; Ambient Conditions - Novexx Solutions 64 Series User & Service Manual

10/14 Rev. 03
The effect of ribbon saving depends on the print speed. The reason for this is the up
and down movement of the print head as well as the acceleration and slowing-down
of the ribbon. Generally said: With a high print speed, less ribbon is saved as with a
low print speed (Tab. 8).
Cutting or dispensing applications can additionally deteriorate the effect of ribbon
saving.
Activate the automatic ribbon saving: See parameter SYSTEM PARAMETER >
Ribbon autoecon..
Setting the minimum distance between two print areas from which on ribbon saving
should be activated: See parameter SYSTEM PARAMETER > Ribb. eco. limit.

[Tab. 8] The amount (length) of consumed ribbon per saving action (lifting and lowering of the print head)

Connections, device data

Mains voltage
100-240 V
Mains frequency
60/50 Hz
Power consumption
350 W
Input current
max. 4,5 A
Protection class
I

Ambient conditions

Operating temp.
+5 to +35 °C
Storage temp.
-20 to +70 °C
Humidity
45 to 75 %, non-condensing
USER/SERVICE MANUAL
64-xx Gen. 2/3
Mind the minimum length of unprinted area, see Tab. 8.
Print speed
in mm/s (Inch/s)
51 (2)
76 (3)
102 (4)
127 (5)
152 (6)
178 (7)
203 (8)
229 (9)
254 (10)
279 (11)
305 (12)
330 (13)
356 (14)
381 (15)
406 (16)
increases with the print speed.
Minimum length of
unprinted area
in mm
3.7
4.6
5.9
7.4
8.9
11.1
14.1
17.6
21.3
25.3
30.0
34.5
39.9
45.6
51.3
Technical Data
Consumed ribbon per
saving action
in mm
1.2
1.9
3.1
4.4
5.9
7.6
9.5
11.3
13.6
15.9
18.5
21.2
24.2
27.3
30.5
10