02/16 Rev. 04
Device description
Printer connections
[7] Back of the 64-xx with the following options installed: USI board (H), connector for remote operator
A Card slot
B Card slot
C USB interface type B (device)
D 2x USB interface type A (host)
E RS232 interface
USER MANUAL
CAUTION!
Add-on devices of an inferior quality may damage the printer!
Connect the printer only to devices that fulfil SELV (safety extra-low voltage)
circuit requirements acc. to EN 60950!
Only connect OEM devices.
A
B
C
D
E
F
G
panel (I) and start/stop signal input (J).
For SD/MMC cards; is not yet supported
For CompactFlash cards; used for storing fonts, logos, graphics, etc.
For transfer of print data
To connect devices (e.g. keyboard, scanner)
For serial transfer of print data
64-xx
H
L
K
Device description
I
J
M
6