Batteries; Install Or Replace Batteries - Current E-WAND Installation Manual And User's Manual

19. Install or replace batteries

When the batteries are depleted, the E-Wand will play a tune instead of
carrying out it's normal functions.
1. Unscrew the Battery Cap
Using two hands, carefully and slowly
unscrew the BATTERY CAP [Fig. 19.1].
Batteries will naturally fall out of the
battery tube, so be prepared to catch
them.
2. Replace Batteries
Replace bad batteries with six (6) new
1.5v Alkaline AA batteries. Always
replace all batteries. NEVER mix old and
new batteries. Also, NEVER use damaged
or dropped batteries.
Insert batteries with the positive (+) end
first [Fig. 19.2].
3. Replace Battery Cap
Screw the BATTERY CAP back onto the end of the E-Wand. The E-Wand will
play a short tune to confirm the batteries have been installed correctly.

BATTERIES

40
Figure 19.1; Unscrew Battery Cap
Figure 19.2; Insert New Batteries