Set Up The Current Products Corp. Bridge Without The Mycurtains App - Current E-WAND Installation Manual And User's Manual

8. Set up the Current Products Corp. bridge
without the mycurtains app
In some rare instances you may want to establish a mesh network without
using the app or WiFi.
1. Power the Bridge
Find an outlet in a location central to
the drapery that you are installing in the
home. Insert the micro-usb end of the
included power cable into the power port
on the bridge. Plug the other end of the
cable into an outlet [Fig 8.1].
Figure 8.1; Plug in the bridge.
The LEDs on the bridge will flash red and
green and then turn solid red [Fig. 8.2].
Figure 8.2; LEDs will flash red and green,
2. Put Bridge in Pairing Mode
then turn solid red.
Push a tack or paperclip into the hole
in the back of the bridge and press and
hold the button for 5 seconds or until the
LED begins to flash blue, then release the
button [Fig. 8.3].
Figure 8.3 - Press and release the
The LED will flash blue and then turn
recessed button on the bottom of the
solid red. After that, the LEDs will stay
bridge
red [Fig 8.4].
Figure 8.4; LEDs will flash blue, then turn
solid red.
30