Setting The Preferred Close Position; Realign Your E-Wand - Current E-WAND Installation Manual And User's Manual

When using the automated features, the E-Wand may close the blinds
16. Setting the Preferred closed position
in a direction different than the direction you prefer (i.e. up or down on
horizontal blinds, or left or right on vertical blinds). To change the preferred
closed position:
Twist the E-Wand TWIST HANDLE until the slats reach your desired
closed position, then release.
Press and hold the PROGRAMMING BUTTON on the E-Wand until
you hear a QUADRUPLE BEEP (4). The E-Wand will now close to this set
position when closed by sensor triggered events.
Based on the construction of your blinds, you may notice the full open position
has changed over time from it's originally programmed position. If you notice
this occurrence, you can simply realign your originally programmed E-Wand
slat positions.
Move the E-Wand manually by twisting the TWIST HANDLE to the
position you consider to be FULL OPEN.
Press and hold the PROGRAMMING BUTTON until you hear a
SEXTUPLE BEEP (6), then release. Your E-Wand has now been realigned
to it's originally programmed positions.

17. Realign YOUR E-Wand

38