Vertical Blinds Installation & Programming Guide; Installing E-Wand On Vertical Blinds - Current E-WAND Installation Manual And User's Manual

Vertical BLINDS
INstallation & Programming
5. Installing the E-Wand on Vertical Blinds
Before installing the E-Wand, make sure you are able to freely tilt your blinds
in both directions by turning the twist wand that originally came with your
blinds. If there is significant resistance you may need to contact your blind
manufacturer.
The E-Wand is not compatible with vertical blinds that use a rope or
chain to tilt the slats.
For the best operation on vertical blinds, use a silicone based spray
lubricant along the inside of the blind headrail and at each carrier.
For this installation you will need:
E-WAND
(6) AA 1.5v ALKALINE BATTERIES
VERTICAL BLIND MOUNT
VERTICAL BLIND REINFORCEMENT TAPE
WAND HOOK SLEEVE (if open hook tilt stem)
19