Changing Batteries; Attaching An E-Wand Extension Handle - Current E-WAND Installation Manual And User's Manual

CHANGING BATTERIES

carrying out it's normal functions.
When the batteries are depleted, the E-Wand will play a tune instead of
Unscrew the Battery Cap
unscrew the BATTERY CAP g
Using two hands, carefully and slowly 17.1]. Batteries will naturally fall out of
them.
the battery tube, so be prepared to catch
Replace Batteries
1.5v Alkaline AA batteries. Always
replace all batteries. NEVER mix old and Replace bad batteries with six (6) new
new batteries. Also, NEVER use damaged
or dropped batteries.
first [Fig. 18.1].
Insert batteries with the positive (+) end
Screw Battery Cap Back On
Screw the BATTERY CAP g back onto the end of the E-Wand. The E-Wand
will play a short tune to confirm the batteries have been installed correctly.
[Fig.
Figure 17.1; Unscrew Battery Cap
Figure 18.1; Insert New Batteries
24

ATTACHING An E-Wand Extension Handle

E-Wand EXTENSION HANDLE
double the length of the TWIST HANDLE f .
For blinds that are taller than average, it may be necessary to attach an
Unscrew the Battery Cap
from the E-Wand [Fig. 19.1]. Be sure not
to remove the batteries. Carefully remove the BATTERY CAP
Screw on Extension Handle
end of the E-Wand. Screw tightly into
place [Fig. 20.1]. Attach EXTENSION HANDLE K onto the
Reattach Battery Cap
of the EXTENSION HANDLE K . Screw
into place. Reattach BATTERY CAP g onto the end
K to the end of your E-Wand. These will
g
Figure 19.1; Unscrew Battery Cap
Figure 20.1; Screw on Extension Handle
25