Mounting & Programming The E-Wand - Current E-WAND Installation Manual And User's Manual

MOUNTING & programming
THE E-Wand
For further assistance during the installation and programming process, please view our
online instructional videos at myewand.com/support,
email support@currentproductscorp.com, or
call us at 844-307-7435.
1. POWER UP
1. Remove Battery Cap
To install the batteries, unscrew the
BATTERY CAP located at the bottom of
the E-Wand TWIST HANDLE [Fig. 1.1].
1.1 Unscrew Battery Cap
2. Install Batteries
Insert the batteries one after the other
with the positive (+) side in first [Fig.
1.2]. Once the batteries have been
inserted, screw the BATTERY CAP back
on to secure.
1.2 Insert Batteries
WARNING: Batteries MUST be installed with the positive end first for
the E-Wand to be operable. Installing batteries incorrectly may result
in the batteries and tube becoming hot to the touch.
When batteries are properly installed, the E-Wand will play a
confirmation tune.
8