3. Installing the e-wand on Horizontal
Make sure the blind slats are in the horizontal or fully opened position
and the header is free of dirt, grime, and grease. If not, use a household
Before installing the E-Wand, make sure you are able to freely tilt your
cleaner to clean the header before installation.
blinds in both directions by turning the twist wand that originally came
with your blinds. If there is significant resistance, you may need to contact
your blind manufacturer. If your blinds utilize a cord to tilt the slats, first
follow the "Converting a Corded Tilt Blind" instructions [Pg. 9].
For this installation you will need:
E-WAND
(6) AA 1.5v ALKALINE BATTERIES
HORIZONTAL BLIND MOUNT
EXTRA ADHESIVE STRIPS
WAND HOOK SLEEVE (if open hook tilt stem)
We recommend having scissors ready for instances where you may
need to trim the blind mount.
Blinds
11