Current E-WAND Installation Manual And User's Manual page 43

3. Pair the Remote
Use a tack or pen to press and release
the PAIRING button on the back of the
remote [Fig. 21.3] When this button has
been pressed, the LED's on the front of
the remote will scroll to confirm.
Figure 21.3; Press in Tack or Pen
To PAIR, press the top left button on the
tilt toggle [Fig. 21.4]. The blind(s) will
jog down and up showing that it has
received the command and completed
the process.
If you ever need to unpair, you can repeat
Figure 21.4; Press to Pair
the same steps and press the bottom
button on the tilt toggle to unpair [Fig.
21.5].
Figure 21.5; Press to Unpair
43