You may create a Twist Group prior to or after installation and
programming. We recommend linking E-Wands prior to installation on
challenging to reach windows.
A Twist Group allows you to group multiple E-Wands together so each will
respond to the manual twist movement given to any other E-Wand you have
placed in the group.
Older, FM only E-Wands CAN be grouped to these new, Zigbee Hybrid E-Wands
as long as the Zigbee E-Wand is the twist group Master.
Note: FM E-Wands will respond to commands sent to Zigbee E-Wands from
app or voice commands.
13. Setting Up a Twist Group
1. Place all the E-Wands you wish to group in Pairing Mode
On the E-Wands you wish to group
together, one by one, press and hold the
PROGRAMMING BUTTON until you hear
a SINGLE BEEP (1), then release [Fig.
13.1].
12. WHat is A TWIST GROUP
Figure 13.1; Press and Hold
Programming Button
35