HORIZONTAL BLINDS
TILT GEAR
VALANCE
STEM
MANUAL TWIST
WAND
OR CORDED TILT
NOTE: Some blinds use a corded tilt mechanism to tilt the slats instead of a wand. If
your horizontal blinds have a corded tilt mechanism, you will need to convert it to a
wand tilt mechanism using the horizontal tilt gear. Instructions for converting to a
wand tilt mechanism can be found on page 26.
Vertical BLINDS
HEADER
NOTE: The E-Wand is not compatible with vertical blinds that
use a rope or chain to open and close the slats.
HEADER
SLATS
LIFTING CORD
SLAT
ATTACHMENT
TILT GEAR
STEM
MANUAL TWIST WAND
SLATS
6
ASSEMBLY AND MOUNTING THE
E-Wand
Instructional Videos at currentproductscorp.com/support.
For further assistance during the assembly and mounting process, please view our online
POWER UP
Remove Battery Cap
of the E-Wand TWIST HANDLE
To install the batteries, unscrew the
1.1].
BATTERY CAP g located at the bottom
Install Batteries
with the positive (+) side in first [Fig.
1.2].
Once the batteries have been
Insert the batteries one after the other
back on to secure.
inserted, screw the BATTERY CAP
If batteries are properly installed, the E-Wand will play a confirmation
f
[Fig.
Figure 1.1; Unscrew Battery Cap
g
Figure 1.2; Insert Batteries
tune.
7