4 Install Hardware
4. 3 Keysight S9101A-BK1
5G Multi-Band Vector Transceiver TR1 with Blocker
Connect the hardware as described in the following table.
Item
*
This cable is used when verifying operation with software at mmWave frequencies, for example 28 GHz.
Disconnect this cable during normal operation. One cable is included with each Keysight S9101A-BK1
5G Multi-Band Vector Transceiver TR1 with Blocker.
34
Qty
Connection To... From...
1
S9100-60005 Three-Cable Bundle (Color-Coded)
Red
SMA (m) to TNC (m), 4000 mm (157.5 in)
Connect S9101RH LO/Pwr/Ctrl IF In
to S9101A LO/Pwr/Ctrl Out.
Black SMA (m) to Type-N (m), 4000 mm (157.5 in)
Connect S9101RH IF In to S9101A IF Out.
White SMA (m) to Type-N (m), 4000 mm (157.5 in)
Connect S9101RH IF In/Out to S9101A IF In.
1
8121-3222 loop-back cable,
2.4 mm (m) to 2.4 mm (m), 152.4 mm (6.0 in),
Accessory Cable
on the S9101RH mmWave Transceiver.
*
: Used to connect from RF Tx/Rx 1 to RF Tx/Rx 2
S9101A 5G Multi-Band Vector Transceiver, Startup Guide