Select The Rf Power Entry Box And Set It To -10 Dbm; Select The Frequency Entry Box And Set It To 3 Ghz - Keysight Technologies S9101A Startup Manual

6 Verify Operation
3. Set the RF Tx/Rx 1 (Head 1 RFHD 1) to 28 GHz; this port can be thought of as
the RF Output (RF Source port) on the S9101RH mmWave Transceiver.
48
a. Select the drop-down menu panel (top-right corner)
and select Input/Output, select the RF Source tab,
select the RF Output Port drop-down menu, and select Head 1 RFHD 1.
b. Select the RF Power entry box and set it to –10 dBm.
c. Select the Frequency entry box and set it to 28 GHz.
d. Leave all of the other RF Output port settings in their preset state.
S9101A 5G Multi-Band Vector Transceiver, Startup Guide