Using Keysight Connection Expert To Retrieve Visa Addresses - Keysight Technologies S9101A Startup Manual

7. 4. 1. 4 Using Keysight Connection Expert to Retrieve VISA Addresses

Keysight Connection Expert
Primary Transceiver, Secondary Transceiver, and the Power Meter (Power Sensor).
To open Keysight Connection Expert on page 63
To retrieve and set the VISA Address of the Primary or
Secondary Transceiver on page 64
To retrieve and set the VISA Address of the Power Meter (Power
Sensor) on page 65
To open Keysight Connection Expert
On Windows desktop:
1. Select the Start menu (lower-left corner icon) and a
list of applications appear in alphabetical order.
2. Select any letter, such as "A", from this list of
applications and a selection menu should appear.
3. Select the letter "K" from this selection menu.
4. Scroll down the list of "K" applications that appear and
select Keysight Connection Expert.
This runs the
located at:
Libraries Suite
1
Keysight Connection Expert is a utility of
instruments and display their status as determined by the Keysight Instrument
Discovery Service.
S9101A 5G Multi-Band Vector Transceiver, Startup Guide
1
can be used to retrieve the "Connection Strings" for the
ConnectionExpert.exe
C:\Program Files\Keysight\IO
Keysight Connection Expert
can also be started from the
tray icon.
a. Select the tray icon.
b. Select the IO icon
(Keysight IO Libraries
Suite).
c. Select
Connection Expert.
Keysight IO Libraries that helps connect
7 Run Power Calibration
63