Keysight Technologies S9101A Startup Manual page 49

6. Set the RF Output to 3 GHz; this is the RF Out port on the Rugged Front Panel.
S9101A 5G Multi-Band Vector Transceiver, Startup Guide
a. Select the drop-down menu panel (top-right corner)
and select Input/Output.
b. Select the RF Source tab, select the RF Output Port drop-down menu,
and set it to RF Output.
c. Select the RF Power entry box and set it to -10 dBm.
d. Select the Frequency entry box and set it to 3 GHz.
e. Select the RF Output On/Off switch and set it to On.
6 Verify Operation
45