Select The Drop-Down Menu Panel (Top-Right Corner) - Keysight Technologies S9101A Startup Manual

5g multi-band vector transceiver

Hide thumbs Also See for S9101A:

Table of Contents

6 Verify Operation

7. Verify IQ Analyzer (Basic) Mode displays a signal at 3 GHz and –10 dBm.

8. On S9101A-TR2 systems, repeat the same process on RF Transceiver 2.

a. Select the drop-down menu panel (top-right corner)

and select Peak Search.

If there is a signal at 3 GHz and approximately –10 dBm,

the RF Transceiver RF Input and RF Output ports

of the S9101A are working properly. (The power level is only

approximate because there is loss in the cable being used and this

loss is not being corrected during the measurement.)

S9101A 5G Multi-Band Vector Transceiver, Startup Guide

Table of Contents

Chapters

Table of Contents