7 Run Power Calibration
88
e. Select
Start the calibration
f. Connect the U8487A Power Sensor or equivalent to the
S9101RH mmWave Transceiver 2 connector
g. Select
to continue the calibration.
Ok
View the
Results Source
Corrections are stored in:
Tx-RFIO_1-CHANNELPOWER.csv
and follow the prompts.
RF Tx/Rx 1 ➀
tab when the calibration is complete.
S9100ID_<SerialNumber>-
S9101A 5G Multi-Band Vector Transceiver, Startup Guide
.