Using The Equipment Tab - Keysight Technologies S9101A Startup Manual

7. 4. 1 Using the Equipment Tab

This section describes how the Equipment tab is used to set VISA Address and
hislip socket number "Connection Strings" for a Primary Transceiver,
Secondary Transceiver, and a Power Meter (Power Sensor).
Primary Transceiver
VISA Address
S9101A 5G Multi-Band Vector Transceiver, Startup Guide
and
Secondary Transceiver
These entry boxes accept "Connection Strings" for a
VISA Address
Primary Transceiver
Secondary Transceiver
S9101A-BK1 5G Multi-Band Vector Transceiver TR1 with Blocker.
"Connection Strings" differ depending on whether the
Power Calibration is run on an embedded controller (local host)
or an external controller (remote host); when run on an:
embedded controller (local host),
the "Connection String" should include a local host
for example,
TCPIP0::localhost::hislip0::INSTR
The default embedded controller (local host), is an M9037A PXIe
Embedded Controller which is located in Slot-1 of the chassis
containing the PXIe modules.
external controller (remote host),
the "Connection String" should include the name of the
external controller (remote host);
for example,
TCPIP0::K-M9037A-12345::hislip0::INSTR
or include the IP address of the external controller (remote host);
for example,
TCPIP0::141.121.XXX.YYY::inst0::INSTR
st
(1 M9410A PXIe VXT) and a
nd
(2 M9410A PXIe VXT); only used in an
7 Run Power Calibration
socket;
hislip
57