Sim Pin And Puk Settings - HMS Networks Anybus Wireless Bolt LTE User Manual

Cellular Settings
APN Authentication
By default, APN Authentication is set to No. When enabled, PAP method is used.
NOTE
APN Authentication is to be configured only if your carrier has setup APN (Access Point Name) with
username and password.
Ensure that you have the APN username and password supplied by your carrier available.
Figure 16. Cellular Settings page
To activate APN Authentication:
1. Set the APN Authentication setting to Yes (PAP).
2. In the User field, enter a username.
3. In the Password field, enter a password.
4. In the left sidebar menu, click Save and Reboot.
Bolt LTE automatically reboots for the settings to take effect.

5.7.3. SIM PIN and PUK Settings

On the Cellular Settings page, SMS PIN and PUK:
SIM Card PIN Code
Figure 17. SIM card PIN code required
If the SIM card installed in the Bolt LTE is locked with a PIN code, enter it in the Enter PIN field.
SCM-1202-164 Version 1.2
® ™
Anybus Wireless Bolt LTE
Page 23 of 60