Set Up Bolt Lte As An Internet Router - HMS Networks Anybus Wireless Bolt LTE User Manual

® ™
Anybus Wireless Bolt LTE

6.2. Set Up Bolt LTE as an Internet Router

Before You Begin
Use Bolt LTE as an internet router to connect machines, controllers or other devices to internet.
NOTE
The Bolt LTE comes with a default username and password. The default username is admin, written
in lowercase letters. You find the default password on the Bolt LTE product housing.
NOTE
The Bolt LTE default IP address is 192.168.0.98 and the subnet mask is 255.255.255.0.
To access the Bolt LTE built-in web interface, ensure that the Bolt LTE IP address and your PC IP address are within
the same IP address range.
Procedure
Connect Bolt LTE to internet
Figure 26. Connect to internet
1. Insert a cellular SIM card in the Bolt LTE SIM card holder.
NOTE
Ensure that the SIM card contact surface is facing towards the Ethernet port.
2. Connect the Bolt LTE Ethernet port to your PC.
3. Connect the Bolt LTE Power connector to a power supply.
4. To access the built-in web interface, enter the Bolt LTE IP address in your web browser and click Enter.
5. Login to the Bolt LTE built-in web interface.
6. Configure the Ethernet Settings, IP address and internal DHCP server settings.
7. Verify that the APN Settings are correct. You can adjust the settings manually.
8. In the left sidebar menu, click Save and Reboot.
Bolt LTE automatically reboots for the settings to take effect
9. On the System Overview page, verify that the cellular Data Connection has status Yes.
Page 34 of 60
Set Up Bolt LTE as an Internet Router
SCM-1202-164 Version 1.2