To Send Sms Messages To The Bolt Lte - HMS Networks Anybus Wireless Bolt LTE User Manual

® ™
Anybus Wireless Bolt LTE
4. In the Site name field, you can enter a label to identify the Bolt LTE.
The Site name is included in the automatically generated welcome SMS sent from the Bolt LTE.
5. Click Save and Reboot.
6. To verify the phone number, the Bolt LTE sends an automatically generated welcome SMS to the handheld
device with the specified phone number.
To Do Next
Send commands from the handheld device to the Bolt LTE.
See To Send SMS Messages to the Bolt LTE (page

5.7.5. To Send SMS Messages to the Bolt LTE

Before You Begin
Use a handheld device with a phone number set as a Trusted number in the built-in web interface of the Bolt LTE
to which you want to send SMS messages.
Ensure you have the phone number available for the SIM card installed in the Bolt LTE to which you want to send
SMS messages.
Ensure you have the configured Access code avaiable for the Bolt LTE to which you want to send SMS messages.
For information about how to configure the SMS communication settings, see
(page 25).
For information about the available commands, see
Procedure
1. On the handheld devices, start a new SMS message.
2. Enter the phone number or contact name of each Bolt LTE to which you are sending the SMS message to.
3. Enter the Access code.
Example 2. SMS message with access code
In this example we use the access code my_access_code.
4. Enter the command.
Example 3. SMS message with access code and command
In this example we use the command help
5. Send the SMS message.
Result
Depending on which command is sent, the Bolt LTE returns a message containing information or a prompt with
instructions on how to continue.
Page 26 of 60
26).
SMS Commands and Returns (page 51)
Cellular Settings
To Enable SMS Communication
SCM-1202-164 Version 1.2