HMS Networks Anybus Wireless Bolt LTE User Manual page 37

Setting Up Bolt LTE with Automatic APN Assignment
2. Connect the Bolt LTE to a power supply and to Functional Earth (FE).
See Connect to Power and Ethernet (page 10)
3. To verify the connection status, check the Bolt LTE RJ45 LED indicators.
See LED Status Indication (page 38)
4. Connect an Ethernet cable between the Bolt LTE and the device to be connected to the internet.
5. Verify that the device is connected to the internet.
SCM-1202-164 Version 1.2
® ™
Anybus Wireless Bolt LTE
Page 33 of 60