Ethernet Settings - HMS Networks Anybus Wireless Bolt LTE User Manual

Ethernet Settings

5.6. Ethernet Settings
IP Settings
Figure 12. Ethernet Settings page, default IP Settings with Internal DHCP Server Enabled
IP Address
NOTE
The default Bolt LTE static IP address is 192.168.0.98.
When you change the IP address:
1. Click Save and Reboot to reboot Bolt LTE.
Bolt LTE reboots for the setting to take effect.
2. In your web browser, enter the new IP address and press Enter.
The built-in web interface login screen appears.
3. Enter Username and Password and click Sign in.
Subnet Mask
NOTE
The default subnet mask is 255.255.255.0. The subnet mask identifies the subnetwork to which the
static IP address belongs.
Internal DHCP Server
IMPORTANT
By default, the Bolt LTE internal DHCP server is enabled. To avoid interference, keep only one DHCP
server enabled on the network.
NOTE
The DHCP server is only enabled on the LAN interface.
By default, Internal DHCP Server is set to Enabled.
This means that the IP address settings are set automatically by the Bolt LTE internal DHCP server.
SCM-1202-164 Version 1.2
® ™
Anybus Wireless Bolt LTE
Page 19 of 60