Cellular Settings; Network Settings - HMS Networks Anybus Wireless Bolt LTE User Manual

Cellular Settings

5.7. Cellular Settings
Before You Begin
When you are going to connect Bolt LTE to a cellular network, ensure that you have installed a SIM card in the
Bolt LTE SIM card holder.
Refer to Install SIM Card (page

5.7.1. Network Settings

Before You Begin
About Preferred Network Type
By default, the Preferred Network Type is set to Modem Preset List.
The most recently registered network type takes precedence.
When a specific Preferred Network Type is selected and available, the Bolt LTE modem might remain locked to
that network type, even if you switch to Modem Preset List.
Solution: If the Bolt LTE modem is locked to a network type you do not want to use, ensure that the network type
is no longer available to the Bolt LTE. The Bolt LTE modem then selects the next available network type.
Procedure
Figure 13. Cellular Settings page
Select a Preferred Network Type:
Setting Description
Modem Preset List Use the Modem Preset List search order for Radio Access Technology (RAT).
Connects automatically to an available network according to following priority order LTE, UMTS and GSM mobile network.
The Bolt LTE modem scans for all available Public Land Mobile Networks (PLMN) in each RAT.
LTE Use LTE network
UMTS Use UMTS network.
SCM-1202-164 Version 1.2
6).
® ™
Anybus Wireless Bolt LTE
Page 21 of 60