Communicator Configuration; Connect The Communicator - HMS Networks Anybus Communicator ABC4021 User Manual

Communicator Configuration

6. Communicator Configuration

6.1. Connect the Communicator

Procedure
Connect to EtherCAT and PROFIBUS network
Network 1 = EtherCAT Network 2 = PROFIBUS
Connect to PC and Power
1. Connect an Ethernet cable between the Communicator and your PC.
2. Connect the Communicator to a power supply.
SCM-1202-198 Version 1.0
® ™
Anybus Communicator - EtherCAT Slave to PROFIBUS DP Device
Page 23 of 56