Set Up Bolt Lte With Ulpm Rest Command - HMS Networks Anybus Wireless Bolt LTE User Manual

® ™
Anybus Wireless Bolt LTE

6.3. Set Up Bolt LTE with ULPM REST Command

NOTE
The Bolt LTE variant for the US market does not support the ULPM REST Command.
You can use Bolt LTE as an internet router with Ultra Low Power Mode (ULPM) to save electrical energy.
Devices using other power sources than grid connected power, such as devices powered by batteries and/or
solar panels, benefit from using ULPM.
NOTE
A power cycle will cancel ULPM. When power is restored, the ULPM command must be re-sent for
the Bolt LTE to re-enter ULPM.
For more information about the ULPM REST command, refer to
(page 30).
Page 36 of 60
Set Up Bolt LTE with ULPM REST Command
Use/Test REST Commands From a Web Browser
SCM-1202-164 Version 1.2