Factory Default Settings - HMS Networks Anybus Wireless Bolt LTE User Manual

® ™
Anybus Wireless Bolt LTE

5.5. Factory Default Settings

Bolt LTE comes with the following factory default settings.
Table 3. Bolt LTE default settings
IP Assignment
IP Address
Subnet Mask
Default Gateway
Internal DHCP Server
Network Type
Incoming Traffic
You can restore factory default settings by making a Factory Reset. Refer to
Page 18 of 60
Static
192.168.0.98
255.255.255.0
192.168.0.98
Enabled
Modem Preset List
Connects automatically to an available network according to priority order LTE, UMTS and GSM mobile
network.
NAT/Port Forward incoming traffic is Disabled.
Factory Default Settings
Factory Reset (page 49)
SCM-1202-164 Version 1.2