AES global CellCOM PRIME Installation & User's Instructions page 25

Ensure SIM is activated.
Pre-pay SIM will need credit first.
Perform a final check of wiring and ensure the antenna is connected before switching on the
power. Once the power is switched on, the power LED should illuminate.
preferred
absolute max!
Pre-wired in iGate
Door/gate limit switch
(to allow remote checking
of door position)
P a g e | 25
Inserting the SIM card
Please ensure the SIM card is a 4G NANO SIM card. Do not
use a SIM card for a tablet, as these only support data, and do
not support voice and SMS. You simply require a mobile phone
type SIM card.
It is always good practice to check if the SIM is active by
putting it into a phone and making a call.
Power Connections
24V dc
28V ac
Insert chamfered
edge first.
WARNING
Ensure power is OFF. Do not hot
insert or remove while power on
Pre-wired to internal call
button *Not on iGate
Push to exit
button
(triggers relay 1)
.