Opening The Box; Identification; Nameplate; Tag Plate - ABB 364G Series Manual

Opening the box

Transport and storage
• After unpacking the pressure transmitter, check the device for transport damage.
• Check the packing material for accessories.
• During intermediate storage or transport, store the pressure transmitter in the original packaging only.
For information on pe rmissible ambient conditions for storage and transport, see "Te chnical data". T he
storage time is indefinite, however, the warranty conditions stipulated in the order confirmation of the supplier
are valid.
The transmitter package includes:
The transmitter
An envelope including the instruction manual and the calibration report
3 mm Allen key
Optional content depending on the selected options:
Bracket kit
Electrical connection blind plug

Identification

The instrument is identified by the data plates.

Nameplate

The Nameplate provides information concerning the model cod e number, maximum working
pressure, range and span limits, powe r supply and output signal. See code/ specification sheet for
detailed information. This plate also shows:
the transmitter serial number (please refer to this number in making inquiries)
the specific details of the transducer (diaphragms material, fill fluid, range limit and identification
number)
the Safety Hazardous Area details (see the specific paragraph in this manual)

Tag plate

An additionally Tag plate, welded to the instrument, provides
the customer tag number and the calibrated range.
This plate includes also the code of transmitter with relevant
options and the special request code (if any).
364Ax-Gx Instruction Manual
11