Table of Contents
Advertisement
2 6 6 D D S H A R T | P R E S S U R E T R A N S M I T T E R S | O I/ 2 6 6 D D S - E N R E V. B
3 Opening the box
Identification plates
The instrument is identified by the data plates shown in Figure 3.
The certification plate (ref . A): contains the certification related parameters for use in Hazardous area.
The Nameplate (ref . B), always made of AISI 316 ss, provides information concerning the model code, maximum working pressure,
range and span limits, power supply, output signal, diaphragms material, fill fluid, range limit, serial number, maximum process
working pressure (PS) and temperature (TS).
The Tag plate (ref . C), instead, provides customer tag number and calibrated range.
The DDS plates (ref . D) are wired-on AISI 316 ss plates for cross identification of Primary-Secondary on both devices with same
DDS identification tag number.
Both certification (ref . A) and tag plates (ref . C) are supplied self-adhesive attached to the electronics housing, as standard. Option
I2 allows to select these plates as metal AISI 316 ss fastened to the electronics housing with rivets.
The instrument may be used as a pressure accessory as defined by the Pressure Equipment Directive 2014/68/EU:
• category III module H for PS > 20 MPa, 200 bar
• art. 4, par. 3 Sound Engineering Practice (SEP) for PS < 20 MPa, 200 bar and for all PS values of 266xRx models.
In this case, near the CE mark, you will find the number of the notified body (0474) that has verified the compliance according to
module H.
266DDS pressure transmitters comply with directive EMC 2014/30/EU.
The certification plate (ref . A) is issued by ABB S.p.A, 22016 Tremezzina, Italy, with the numbers:
• FM09ATEX0024X or IECEx FME 16.0003X or FM22UKEX0087X (Ex ia)
• FM09ATEX0023X or IECEx FME 16.0002X or FM22UKEX0086X (Ex db, Ex tb)
• FM09ATEX0025X or IECEx FME 16.0004X or FM22UKEX0088X (Ex ic, Ex tc)
It provides MD: manufacturer date, in the format mm/YY: month of production/year of production
CE-Identification number of the notified bodies to Pressure Equipment Directive: 0474, to ATEX certification: 0722, to IECEx
certification: IT/CES/QAR07.0001.
9
Advertisement
Table of Contents
