Table of Contents
Advertisement
3.1.
Main halyard
1.
If you have a spinnaker, do chapter spinnaker halyard
first.
2.
thread the main halyard through the middle sheave in the
mastbase. Knot a figure 8 knot at the bottom of the mast.
3.
Make a figure 8 knot 20 cm below the other end of the
main halyard.
4.
Push the knot into the sail groove and drag the line
through the mast.
5.
At the top of the mast: take the knot out. Feed the halyard
through both eyelets of the hook. Guide the line around
the mast sheeve.
30.
Make sure the line goes through both eyelets of the
main halyard swivel hook!
6.
Knot the other end of the main halyard line with a figure 8
knot to the eyelet on the main halyard ring. Tie everything
temporarily to the mast.
5mm
Main halyard
30.
Advertisement
Table of Contents
