Table of Contents
Advertisement
6.
Insert the trampoline tie rod into the trampoline, making
sure that the sides are covered in cloth. Enter the rod via
the hole in the side of the trampoline.
16.
7.
For the last bit of pulling you can use a rope through the
rear trampoline rod. Do not use the grommets in the
trampoline. As these can rip your trampoline.
8.
Tension the trampoline bolts according to the platform
assembly chapter.
9.
Make a small bowline in the port end of the rope.
10.
Loop the rope through the tie rod from top bottom, port
to starboard.
Advertisement
Table of Contents
