Table of Contents
Advertisement
10.3.
Traveler system without splittail
1.
Make a knot in the mainsheet.
2.
Feed the end through the traveler cleat and eye.
3.
Knot the end of the rope to the strap eye attached to the
middle of the rear beam.
78.
4.
Move the traveler car to the side, a few centimeters away
from the red traveler stop, and replace the knot from step
1 towards the cleat on the traveler, making sure the car is
not able to hit the (security) end stop.
5.
Attach the mainsheet blocks to the traveler eyelet.
Advertisement
Table of Contents
